NOVUS Polish #1 Clean and Shine

Gently cleans all plastics without scratching. Leaves a lustrous shine that resists fogging, repels dust, and eliminates static. Resists finger marking Contains no abrasives or harsh chemicals Leaves a smooth, clean, greaseless shine. If the surface is extremely dirty, apply NOVUS No. 1 liberally and wipe using long, sweeping strokes. Do not use pressure at this time or large dirt particles may scratch the plastic. Re-apply NOVUS No. 1. Polish using short, circular strokes with a clean portion of the cloth. When surface is thoroughly clean and uniformly covered, buff to a slippery glaze with a clean portion of the cloth. Surfaces buffed to a high glaze are more resistant to dust and future scratching. Reapply NOVUS No. 1 regularly to maintain the antistatic, smudge and scratch resistant properties.

NOVUS Polish #2 Fine Scratch Remover

Removes fine scratches, haziness and abrasions from most plastics. With repeated use, NOVUS No. 2 restores faded and discolored plastics.Removes the damage instead of filling it in Buffs out quickly After restoring, seals with a coat of polish Observe condition of the surface to be treated. The deeper the scratches, the greater the pressure required to remove them. If the surface is dirty, clean with NOVUS No.1 before applying NOVUS No. 2. Shake well. Test in an inconspicuous area. Apply NOVUS No. 2 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times. When the worst scratches have been polished out, reapply NOVUS No.2 uniformly in a circular motion to the entire surface using short, circular strokes and light pressure. Allow to dry to a light haze. Using a clean portion of the cloth, buff the surface to a slippery glaze using firm, short strokes. This procedure is imperative in achieving the best results. For heavy scratches, multiple applications of NOVUS No. 2 or application of NOVUS No. 3 may be required. Follow with NOVUS No. 1 for best results.

NOVUS Polish #3 Heavy Scratch Remover

Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with NOVUS No. 2 polish. Requires use of NOVUS No. 2 for final finishing Not recommended for use on coated plastics Shake well. Test in an inconspicuous area. Apply NOVUS No. 3 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times. Continue polishing until only fine scratches remain. Using cloth, remove all remaining polish, this is very important! Using a clean cloth, apply NOVUS No. 2 in a circular motion uniformly to entire surface. Polish using light pressure until NOVUS No. 2 dries to a light haze. Using a clean portion of the cloth, buff the surface clean. Follow with NOVUS No. 1 for best results.

Typical uses of NOVUS Products

Plastic Storm Windows & Skylights
Boat Windows & Fiberglass
Auto Interiors, Gauges, Chrome, & Acrylic Paint
Collapsible Windows on Convertibles & Sport Utility Vehicles
Motorcycle Windscreens, Visors, Fairings & Helmets
Snowmobile Windshields, Helmets, & Hoods
Turntable Dust Covers, Stereo Faceplates
Compact Discs, Video Laser Discs, & CD ROM's
Acrylic Hot Tubs & Spas
Acrylic, Fiberglass or Cultured Marble Tubs, Showers & Counters
Microwave Oven Doors, Decorator Acrylic Refrigerator Panels
Acrylic Aquariums
Telephones, Pagers, Scanners
Acrylic Trophies & Awards
Plastic Display Cases & Signs
Gauges & Instrument Control Panels
Safety shields & Goggles
Airplane Windows
Salad Bar Sneeze Guards
Video Games, Pinball Machines & Jukeboxes
Copiers and Fax Machines
Acrylic Furniture
Cash Registers & Calculators
Emergency Vehicle Light Bar Lens Covers
Acrylic on Tanning Beds