True Union Ball Valves
1/4" to 6", PVC, Corzan® CPVC and PPL

Rugged, Heavy Wall Construction: Stands up to the most aggressive applications.  Hayward True union Ball Valves can take the day to day abuse of industrial service and continue to function.
True Union Design:  This makes these valve very easy to maintain by allowing for easy removal from a piping system without breaking down piping connections.  Just unscrew the two assembly nuts and lift the valve body out of the line.
Advanced Design Features:  Hayward True Union Ball Valves are superior performers. A fine pitch seal retainer thread allows for accurate compensation for seat wear.  Reversible seats make it easy to get a damaged valve back in service.  Should the seats become damaged they only need to be removed, turned over, and reinstalled to put the valve back on line. These valves feature a double o-ring stem seal for twice the leakage protection of valves with only a single stem seal.
Never a Problem with Corrosion:  This is because of the valves all plastic construction.  They will never rust or corrode...and they can survive corrosive environments without the need for painting or expensive epoxy coatings.
Easily Automated:  These valves have been designed sot that they can be easily converted to an automated valve in the field.  To do this, just remove the compression fit handle and install an actuator mounting bracket.

 Click here to take a look at a slide show that shows the benefits of Hayward's True Union Design Ball Valve

Butterfly Valves
1-1/2" to 12", PVC, Corzan® CPVC & PPL Bodies with PVC, Corzan® CPVC, PPL or PVDF Discs

A Better Butterfly Valve:  Hayward Butterfly Valves up to 12" are rated at a full 150 psi.  Unlike other plastic butterfly valves, Hayward valves are constructed from a one piece body that incorporates fully supported flange bolt holes (the valve has the same number of bolt holds as the matching 150# ANSI flange).  This prevents stressing of the mating pipe flanges.  The heavy duty construction of the valve stands up to the most demanding applications.  The rock solid integral mounting pad insures that the valve operator will function reliably, whatever operator is used, lever handle, gear box, or actuator.
Extra Features, No Extra Cost:  Hayward Butterfly Valves feature a blowout proof stainless steel stem and a unique full body liner that has a V-notch retention design.  This assures positive sealing of the liner to the valve body.  An integrally molded face seal provides positive sealing against the mating flange without the need for additional gaskets.  And the lever handle has a built in lockout feature.
Better Sealing:  Other plastic butterfly valves have only a thin o-ring on the disc to seal the valve, but Hayward valves feature a full body liner seal.  This means that the process media never contacts the valve body.  And you can count on the full liner seal to perform reliably, year after year.
Easy Retrofit:  Hayward Butterfly Valves can be easily fitted into a metal piping system.  All valve sizes meet face to face standards, allowing simple retrofit.
No Metal, No Corrosion:  These valves have no metal in contact with the process media.  They cannot corrode or rust, nor will they contaminate sensitive fluids flowing through them.

True Union Ball Check Valves 1/4" to 6", PVC, Corzan™   CPVC and PPL

Backflow Prevention:  Hayward True Union Ball Check Valves prevent reversal of flow in piping systems.  They are ideal where backflow could potentially cause damage to pumps, filters, or process equipment.
Automatic Operation:  The valves operate without the need for any adjustments or settings.  Line pressure moves the solid plastic ball off the elastomer seat, opening the valve.  When the inlet flow stops, back pressure moves the ball back onto the seat, stopping the flow. The valves feature a unique square cut elastomer seat to seal at low backpressures.
True Union Design:  Valve sizes 1/2" to 6" feature a true union design.  This allows for easy removal from a piping system without breaking down piping connections.  Just unscrew the two assembly nuts and lift the valve body out of the line.  A Trim Check design is used for the 1/4" and 3/8" sizes.  While not true union, these size valves are fully repairable, unlike some other smaller check valves.
No Corrosion Failures:  Because of their all plastic construction, these valves will never jam or stick as a result of rust or corrosion.  Also they will not contaminate sensitive fluids that come into contact with them.

Y Check Valves 1/2" to 4", PVC

Backflow Prevention:  Hayward Y-Check Valves prevent reversal of flow in piping systems.  They are ideal where backflow could potentially cause damage to pumps, filters or process equipment.
Reliable Operation:  The valve operates without the need for any adjustments or settings. A plastic coil (not a spring) supports the disc inside the valve body.  When the inlet flow stops, backpressure (a minimum of 2 psi is required) moves the disc with its elastomer o-ring onto a plastic seat, shutting off the flow.  The plastic coil reliably guides the disc onto the seat.  If your application requires a spring loaded check valve click here.
Easy Maintenance:  Hayward Y Check Valves are easily serviced without disconnection from the piping system.  Just remove the heavy duty hex cap for quick access to the internal valve components.
No Corrosion Failures:  Because of their all plastic construction, these valves will never jam or stick because of rust or corrosion.  Also they will not contaminate sensitive fluids that come into contact with them.  And they require no painting or coatings to stand up to corrosive environments.

Plastic Y Strainers
1/2" to 4", PVC, Clear PVC and Corzan® CPVC

Bulkhead Fittings
1/2" to 4", PVC, Corzan™ CPVC and PPL

Features

• Safe-T-Loc Design
• EPDM or Viton^® Seals
• Buttress Threads Protect Against Blowout
• Hex Body For One-Person Installation
• Rated At a Full 150 psi
• Two Year Warranty

Easy Tank Connections:  Hayward Safe-T_Loc Bulkhead Fittings (Tank Adapters) easily permit quick pipe connections to be made to plastic, or metal tanks.  Simply cut the proper size opening in the tank, slide the body of the fitting through it, and then just tighten the nut. The fitting is now ready to accept the piping connection. Rugged Design:  These bulkhead fittings have been designed to stand up to the most demanding applications without leaking, year in and year out.  They are molded with an extremely heavy wall thickness and will withstand most abuse without failure. Leak Protection:  All sizes of Hayward Bulkhead Fittings come standard with heavy-duty buttress threads to help prevent leaks under pressure.  These buttress threads are substantially stronger than the standard threads on ordinary bulkhead fittings. Easy Installation:  Hayward Bulkhead Fittings have been designed so that only one person is needed to install it, not two.  A special hex shape on the body end of the fitting allows it to be gripped from outside the tank while the nut is tightened. Can't Rust, Won't Corrode:  These all plastic bulkhead fittings will never fail due to rust or corrosion.

Series EA Electrically Actuated True Union Ball Valves, 1/2" to 2", PVC

Low Cost, Full Featured Valve and Actuator Combination

Features		Options
All-plastic PVC construction Rated to 225 psi EPDM seals PTFE seats Full port design Fully Serviceable Double o-ring stem seal Two Year Warranty		All-plastic Nema 4x enclosure Thermal overload protection Permanently lubricated gear train Actuator brake No need for manual adjustments

Low Cost Automation:  The EA electrically actuated true union ball valve is the perfect answer to cost sensitive, automated valve applications that can't get by with less than a full featured valve and actuator combination.  Other low cost automated valves use a stripped down actuator with a non-repairable, "throw-a-way" type valve.  The EA features a fully serviceable true union ball valve for long reliable service.
Corrosion Resistant Valve:  The all plastic construction of the EA true union ball valve means that there will never be a problem with rust or corrosion.  The valve will never stick, jam or fail to operate like a metal valve might because of corrosion.
Built to Last:  The EA Series valves feature a rugged 110 VAC electric actuator with an output torque of 140 in. lbs.  A built-in, automatic resetting thermal overload protector prevents motor burnout.  The 25% duty cycle motor drives the valve through a permanently lubricated, rugged gear train.  There is never a need to set, adjust or fool with internal actuator adjustments, which are set for the life of the actuator when it is built.  All internal components are sealed inside a rugged, all plastic Nema 4X housing.
True Union Ball Valve:  Rated at 225 psi, the valve features a true union design for easy removal from the piping system for maintenance.  There is never a need to disturb piping c connections.  EPDM seals and PTFE seats hold up to the most aggressive of applications.  The full port valve design insures maximum flow rates with low pressure drops.  This rugged, fully serviceable valve will provide years of reliable service in the most demanding of applications.